The DataGauss MAX has been designed with simplicity in mind. Releasing the catch lifts the lid, allowing media to be placed into the chamber. Closing the lid and pressing the ‘erase’ button on the control panel activates the charging of the powerful degaussing magnetic field. When the display says the degauss cycle is complete, the lid can be opened and the media removed. The entire process takes just 15 seconds.
Throughout the whole erase cycle the on-board processor monitors the erase procedure ensuring that it is completed correctly. The operator is shown erase progress and immediately alerted to any interruptions in the cycle by messages on the LCD control panel.
The DataGauss MAX is designed to help you comply with the following Government Mandates that require destruction of sensitive information stored on Hard Drives and Backup Tapes before their disposal.
- PCI DSS (Payment Card Industry) Data Security Standard
- GDPR (General Data Protection Regulation)
- PIPEDA (Personal Information Protection and Electronic Documents Act)
- NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-88
- NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36
- Gramm-Leach-Bliley Act (GLBA)
- HIPAA (Health Information Portability and Accountability Act)
- California SB-1386
- Bank Secrecy Act (BSA)
Safe & Secure
With safety in mind and to meet the latest ICNIRP Magnetic Exposure Guidelines, the DataGauss MAX field discharge duration is less than a second and the magnetic field is designed to be concentrated inside the chamber.
Degauss Method: Pulse discharge, chamber degausser
Media Handling: Standard PC, Laptop and Server 3.5″, 2.5″ & 1.8″ Hard Drives. Longitudinal & perpendicular recording. All Drive interfaces IDE, SATA and Fibre Channel.
All Backup tapes including DLT,2,3,4,5,6 & SDLT, LTO1,2,3,4,5,6,7 & 8; 3480/3490/3490e, 3590, 9840 & T9940 & T10000 tape; Ultrium & Redwood SD-3 tape & cartridges; Mammoth 1 & 2, 8mm, AIT1 & 2,M2 tape; DDS 1, 2, 3, 4 & 5, DD-2 & DFT-1
Charge Time: 7 Seconds
Media Chamber Capacity:5.9″ x 1.2″ x 4.3″ (150mm x 30mm x 110mm)
Magnetic Force: 10,000 gauss (1 Tesla)
Cycle Time/Erase Time: 15 seconds typical
Throughput: 240 hard drives/cartridges per hour typical
Duty Cycle: Continuous
Power Supply: 100-120 VAC, 208-240 VAC, 50/60Hz
Current Rating: 100-120V 4 Amps， 208-240V 2.5 Amps typical
Controls: On/Off Power switch, Erase button
Temperature: 41°F – 104°F (5°C – 40°C)
Humidity: 10%H – 40%H Without Condensation
Specifications are subject to change without notice
Note: After degaussing, hard drives should not be reused as they are stressed in the erasure process. Some backup tapes may not be reusable after degaussing due to the servo track being erased.