ZX Tower


  • High-speed wiping
  • The ZX-T will sanitize hard drives at speeds exceeding 24GB/min
  • Multi-target wiping. 8 dedicated 3.5” SAS/SATA bays, 4 USB 3.0 ports
  • Built-in support for 3.5” SAS/SATA hard drives. Support for standard-height (up to 9mm)
  • 2.5” SATA is available with an optional slide-in caddy
  • 2.5” SAS is supported with an optional adapter
  • IDE, 1.8” and 1.8” IDE ZIF drives support is available using optional adapters
  • SATA, mSATA, microSATA and Flash Media supported with optional adapters
  • Supports wiping USB enclosures and USB thumb drives. 4 USB 3.0 ports are available
  • DoD Wipe. Supports 7 pass DoD 5220-22M wipe
  • Secure Erase. Supports a single pass Secure Erase  ustom Pass Wipe. Set a custom number of wipe passes. Gutmann 35 pass wipe can be accomplished using the Task Macro feature

Optional adapters

  • 2.5” SATA Caddy
  • SATA/SAS 18” Extension adapter
  • 2.5”/3.5” IDE to SATA adapter
  • 1.8” IDE to SATA adapter
  • 1.8” IDE ZIF to SATA adapter
  • 1.8” microSATA adapter
  • mSATA to SATA adapter
  • eSATA 18” cable
  • Flash card reader for compact flash media (connects to USB 3.0 ports)
  • Extended warranties


Power Requirements
10A-6A 50-60Hz
Power-Protected Bays. If a defective hard drive causes a power failure, only
the bay in which the drive is inserted will shut down. The remaining bays will
continue to operate.
Operating Temperature
32° -104° F
Agency Approvals
RoHs compliant
17”H X 17”D X 7.5”W
43.2cm X43.2cm X 19.1cm
22 lbs
Relative Humidity Operating: 85%
RH, non-condensing